- 0000 INR
With standard 20mm collar for all MICROMOT drilling and milling units which are equipped with steel collets.
For engraving letters, numbers and individual shapes on metal, plastics, glass or stoneware. For name plates, jewellery or valuable materials. Also easy to manufacture miniature, individual shapes, engravings, cut-outs and outline shapes, even in series, using self-made templates or commercially available templates (plants, animals, coats of arms).
Guide bar (template holder) holds a maximum of 14 letters. Template contours are precisely to be followed using the guide marker (ball handle).
The lettering to be milled is scaled down during transfer. The transfer ratio can be fixed at 2:1, 3:1, 4:1 or 5:1 by simply adjusting two screws. The work piece is aligned and fixed on the movable guide block with clamping jaws (here MICROMOT clamping jaw set NO 24 256) or a vice.
Scope of delivery:
two sets of letters from A to Z, incl. hyphen, full stop and slash (total 52 items), one each HX key 1.5 – 3 and 5mm as well as a HX (ball head) screwdriver 2.5mm. Complete with a comprehensive instruction manual.
NO 27 106
Stencil set for engraving device GE 20
Letters A – Z, incl. hyphen, full stop and slash. Also numbers 0 – 9. For use with guide bar of the GE 20.
NO 27 104
Solid carbide stylus for engraving device GE 20
For steel, cast steel, non-ferrous metal, plastic, glass, stoneware and tiles. Nose angle 60° (for V-shaped letters). Shaft diameter 3.2mm.
NO 28 765 Letter width 0.5mm
NO 28 766 Letter width 1mm
Manual for creative model-makers
Over 370 pages of information and tips from all areas of model building. All illustrations in colour. Attractively produced, this book affords a good insight into the areas of materials and their application possibilities. It describes tools and work techniques in general and gives comprehensive technical explanations concerning MICROMOT devices and available accessories. A large portion is devoted to practical tips and a clear appendix of useful tables completes the contents of this helpful manual. Available in German only !
NO 28 996
- 10 Per Month
- 15-30 Days
104, Madhav Darshan Complex, Opp. Cricket Ground, Lal bunglow,, Jamnagar, Gujarat, 361006, India